Home » Process Filtration » Prefiltration » Safetect PME Prefiltration Brisip SP3 Steam-in-Place(SIP) Capsule Filter

Safetect PME Prefiltration Brisip SP3 Steam-in-Place(SIP) Capsule Filter

In stock
Part No. SP3SSPMEAP1P
Pore Size
Vent and Drain Valves

Hydrophilic Filter with High Dirt-Holding Capacity.

Specifications

Materials Membrane Hydrophilic Polyethersulfone(PES)
Support Polypropylene(PP)
Core/Cage/End Cap Polypropylene(PP)
Capsule Housing Polyetherimide (PEI)
Capsule Port Insert 316L Stainless Steel
End Cap O-rings Silicone
Vent O-rings Silicone
Inlet/Outlet 38 mm (1 1/2") Sanitary Flange
Filtration Area 0.15m²
Operating Conditions Max. Operating Temperature 80°C
Max. Differential Pressure (Forward) 0.55 MPa @25°C
0.10 MPa @80°C
Max. Differential Pressure (Reverse) 0.21 MPa @25°C
Sterilization Option SIP Can be SIP 8 cycles for 60 min at 135 °C (Differential Pressure < 30 kPa).
Autoclavable Can be autoclaved 10 cycles for 30 min at 131 °C
Quality Standards Integrity 100% Integrity testing
Traceability Each filter with a unique serial number
QMS ISO 9001:2015
Package Pack Size 1/pk
Packaging Double PE bag


Features

  • Double-layer design
  • Extensive chemical compatibility
  • High dirt-holding and loading capacity
  • High flow rate
  • High bacterial retention capacity

Applications

  • Terminal sterilization protection
  • Pre-filtration of mycoplasma removal
  • Buffer Filtration

Regulatory Compliance

  • Effluent meets the USP<788> requirement of particulate matter in large volume injection.
  • Component materials meet the criteria for a “Non-fiber-releasing filter”as defined in 21 CFR 210.3(b)(6).
  • Retention of 10⁷ cfu/cm² Brevundimonas diminuta(ATCC 19146) according to ASTM F838.
  • Aqueous extraction from a cartridge contains less than 0.25EU/ml as determined by Limulus Amebocyte Lysate (LAL), meeting requirements of USP<85>.
  • Components meet the requirement of USP <87> In Vitro Biological Reactivity Test.
  • Components meet the criteria of the USP <88> Biological Reactivity Test for Class V-121 °C plastics.
  • Components meet the FDA indirect Food Additive requirements cited in 21 CFR177-182.
  • Based on the current information from our suppliers, all components used in the manufacture of this product are animal-free.


*Contact us for more specification details.