Excesal CHE Clarification Bricap L Series Capsule Filters
*Not for medical use
Couldn't load pickup availability
Clarification Filter with High Retention Rate.
Specifications
| Materials | Membrane | Polypropylene(PP) |
| Support | Polypropylene(PP) | |
| Core/Cage/End Cap | Polypropylene(PP) | |
| Capsule Housing | Polypropylene(PP) | |
| Capsule Vent O-rings | Silicone | |
| Filtration Area | L03-0.1m² L05-0.18m² L10-0.36m² L20-0.72m² L30-1.08m² |
|
| Operating Conditions | Max. Operating Temperature | 80°C |
| Max. Differential Pressure (Forward) | 0.55 MPa @25°C 0.10 MPa @80°C |
|
| Max. Differential Pressure (Reverse) | 0.21 MPa @25°C |
|
| Quality Standards | Traceability | Each filter with a unique serial number |
| QMS | ISO 9001:2015 | |
| Sterility | Delivery Condition | Non-sterile |
| Sterilization Method | Can be autoclaved 20 cycles for 30 minutes at 125°C (Can not be steam sterilized in-line) | |
| Package | Pack Size | 1/pk |
| Packaging | Double PE bag |
*Note: Cobetter also provides filters with different sterilization methods:
Pre-sterilized filters by autoclaved for 30 minutes at 121°C (Packed in sterile breathable bags).
Features
- Inner layer uses nanofibers for very high retention rate
- Two-layer structure with increasing precision
- High dirt-holding capacity and long service time
Applications
- Fermentation broth
- Pre-filtration blood products/serums
- Pre-filtration of colloids/viscous liquids
Regulatory Compliance
- Effluent meets the USP<788> requirement of particulate matter in large volume injection.
- Component materials meet the criteria for a “Non-fiber-releasing filter”as defined in 21 CFR 210.3(b)(6).
- Retention of 10⁷ cfu/cm² Brevundimonas diminuta(ATCC 19146) according to ASTM F838.
- Aqueous extraction from a cartridge contains less than 0.25EU/ml as determined by Limulus Amebocyte Lysate (LAL), meeting requirements of USP<85>.
- Components meet the requirement of USP <87> In Vitro Biological Reactivity Test.
- Components meet the criteria of the USP <88> Biological Reactivity Test for Class V-121 °C plastics.
- Components meet the FDA indirect Food Additive requirements cited in 21 CFR177-182.
- Based on the current information from our suppliers, all components used in the manufacture of this product are animal-free.
*Contact us for more specification details.