Home » Laboratory » Syringe Filters » Hydrophilic PTFE Syringe Filters Non-sterile HPLC-certified 100pcs/pk

Hydrophilic PTFE Syringe Filters Non-sterile HPLC-certified 100pcs/pk

In stock
Part No. SFUPTH-2025
$68.40 USD
$76.00 USD $68.40 USD (-10%)
Diameter
Pore Size
Package
Loading locations...
*International Shipping within 8 Business Days
*Customers are responsible for any import duties or taxes
*Read our Shipping Policy and Refund Policy
*Not for medical use

Cobetter hydrophilic PTFE syringe filters are HPLC-certified syringe filter that remove particles prior to instrumentation analysis(liquid chromatography or mass spectrometry analysis). They are made of modified hydrophilic PTFE membrane, which has very high chemical compatibility with both aqueous and organic solutions. When filtering aqueous solutions, there is no need for pre-wetting with solvent.

The housing is made of premium polypropylene which has a wide chemical compatibility. The over molded design ensures higher operating pressures. Luer lock inlet/outlet offers leak-tight syringe connection.

Features

  • 13 and 25 mm diameter syringe filters
  • Avaliable in pore sizes of 0.22μmand 0.45μm
  • HPLC-certified for low levels of UV-absorbing extractables
  • Broad chemical compatibility, high resistance to acid and alkali
  • Low protein binding
  • HPLC-certified

Applications

  • For sample filtration before UHPLC, HPLC, and LC-MS
  • Filtration of both aqueous and organic solutions (including aggressive organic solutions)
  • Strong acid and alkali solutions
  • High temperature solutions

How to use a syringe filter?

Choose the right type of membrane material based on the properties of your sample. Be careful of the chemical compatibility to avoid extractables and leachables. Read this article about How to choose a syringe filter.

1. Load the sample into the syringe.

2. Attach the filter to the luer-lock of the syringe with a twisting motion. Make sure it is securely attached.

3. Filter the sample. Hold the syringe and filter vertically, and gently press the plunger to push the sample through the filter. Take care not to apply too much force or you may damage the filter.

4. Discard the used filter and repeat for the next sample.
Connections Inlet Female Luer Lock
Outlet Male Luer Slip
Materials Housing
 Polypropylene
Membrane PTFE
Wettability Hydrophilic
Physical Properties Pore Size 0.2 μm, 0.45 μm
Filter Diameter
13mm 25mm
Filtration Area
0.72cm² 3.4cm²
Maximum Operating Pressure
6bar 3bar
pH Range 1.0 – 14.0
Sterility Delivery Condition Non-sterile
Sterilization Method Not Recommended
Package Packaging Bulk packed
Pack Size 100 pcs/pk


Performance

Filter Diameter Pore Size Flow Rate (mL/min@0.21Mpa,
20°C, 210kPa, 30psi)		 Bubble Point
(MPa, Water)
13mm 0.22μm 22 ≥0.2
0.45μm 86 ≥0.1
25mm 0.22μm — ≥0.2
0.45μm 302 ≥0.1

 

Select by Volume

Sample Volume Filter Diameter Filtration Area Hold-up Volume
< 10mL 13mm 0.72 cm² < 25μl 
10mL to 100mL 25mm 3.4 cm²  < 100μl
100mL to 200mL 33mm 4.5 cm²  < 125μl

 
  • Chemical_Compatibility_Chart_for_Syringe_Filters Download