0.1μm PES Syringe Filters for Mycoplasma Filtration with 0.2μm Pre-filter Sterile Individually Packed
Couldn't load pickup availability
*Read our Shipping Policy and Refund Policy
Cobetter sterile PES syringe filters are individually packed and made of two layers of asymmetric polyethersulfone (PES) membrane. The first layer is a prefilter with larger pore size which makes the syringe filters with high throughput. This construction prevents the build-up of back pressure typically caused by the blocking of an unprotected membrane.
Available with pore size of 0.1μm, 0.22μm, 0.45μm, 0.8μm and 1.2μm. The low protein binding PES membrane suitable for filtration of aqueous and mild organic solutions.
The housing is made of premium polypropylene which has a wide chemical compatibility. The Over molded design ensures higher operating pressures. Luer lock inlet/outlet offers leak-tight syringe connection.
Specifications
| Connections | Inlet | Female Luer Lock | |||
| Outlet | Male Luer Slip | ||||
| Materials | Housing |
PP | |||
| Membrane | PES | ||||
| Wettability | Hydrophilic | ||||
| Physical Properties | Pore Size | 0.2 μm(prefilter)+0.1 μm | |||
| Filter Diameter |
|
||||
| Filtration Area |
|
||||
| Maximum Operating Pressure |
|
||||
| pH Range | 3.0 – 14.0 | ||||
| Sterility | Delivery Condition | Sterile | |||
| Sterilization Method | Gamma Irradiation | ||||
| Package | Pack Size | 100pcs | |||
| Packaging | Single blister packed |
Features
- 13, 25 and 33 mm diameter syringe filters
- Double-layer membrane with graduated pore size for excellent loading capacity with fast flow rate
- Low protein binding
- Exceptional chemical compatibility (pH range: 1-14)
- Individually packed, Eliminates sample contamination
Applications
- Polyethersulfone (PES) for serum, plasma and tissue culture
- Protein based samples in aqueous solutions
- Mild organic solutions
- Routine sample preparation
- Environmental samples
Select by Volume
| Sample Volume | Filter Diameter | Filtration Area | Hold-up Volume |
| < 10mL | 13mm | 0.72 cm² | < 25μl |
| 10mL to 100mL | 25mm | 3.4 cm² | < 100μl |
| 100mL to 200mL | 33mm | 4.5 cm² | < 125μl |
How to use a syringe filter?
Choose the right type of membrane material based on the properties of your sample. Be careful of the chemical compatibility to avoid extractables and leachables. Read this article about How to choose a syringe filter.
1. Load the sample into the syringe.
2. Attach the filter to the luer-lock of the syringe with a twisting motion. Make sure it is securely attached.
3. Filter the sample. Hold the syringe and filter vertically, and gently press the plunger to push the sample through the filter. Take care not to apply too much force or you may damage the filter.
4. Discard the used filter and repeat for the next sample.
